Clamping force, Injection moulding machine, Reduce energy consumption, Booster, Clamp

Increases clamping force up to 60% and is compatible with all injection moulding machines. R.O.I. in less than 12 months with an average  R.O.I of 6 months for automotive parts. Buy smaller machines and save €10 000/month/injection moulding machine.

Injection moulding machine, Reduce energy consumption, Booster, Clamp

[responsivevoice buttonposition=”before” buttontext=”Listen to this”]

What is IRONJAW®?

IronJaw is compatible with injection moulding machines for plastic, rubber and other injection processes and uses hydraulic presses to increase the force generated by those machines. The product is sold in a kit consisting of two clamps and you can choose between 4 sizes to fit your moulds. More than one pair of clamps can be complied to the same mould and give the amount of force needed.  

 

  4 kit, Ironjaw, clamping force, injection molding

 

 

 

 

4 kit sizes generating different amount of force

.

.Benefits

Purchasing larger machines for injection moulding will now be an unnecessary investment as IRONJAW compiled with your standard machine will provide the same amount of clamping force as a larger machine. Injection moulding machine, Reduce energy consumption, Booster, Clamp

If an injection moulding machine capable of generating 1250 tons of force is downgraded to a machine capable of 1000 tons then a IRONJAW kit of size L will be enough to make up the difference in force. This will lead to your company saving €20/h, where only hourly rate is included. By running the machine in 3 shifts (250 days/yr) will mean that the machine is running 6 000 h/yr and will lead to your company saving more than €120 000/yr or €10 000/month. R.O.I can therefore be expected in 6 months. 

 

More benefits: 

  • Increase the maximum available tonnage of your injection plant by 60%
  • Buy smaller new injection machines than conventionally required
  • Use your molds in smaller injection machines at lower hourly rates
  • Increase number of cavities of your tools
  • Downgrade your resins (cheaper with higher viscosity)
  • Reduce your cycle time
  • Reduce maintenance costs
  • Reduce energy consumption
  • Flash reduction
  • Reduce part thickness
  • Allow non symmetrical injection
  • No maintenance required
  • Interchangeable (multi-mold and multi-machine)
  • Build simpler molds
  • Short ROI (less than 12 months with an average of 6 months)
  • Enables bigger moulds in smaller machine
  • Less amount of material can be used in your product
  • Material can be injected quicker into your molds [/responsivevoice]

The first “camping booster” in the world

 

Type of News: °Partner_IRONJAW, Industry_Polymer_Thermoplastics, Plastic injection, rubber injection, metal injection, RTM

Keywords: Injection moulding machine, Reduce energy consumption, Booster, Clamp